Shop name
|
Mainly equipment |
Model, specification, performance |
| Limestone Crushing |
Hammer crusher |
TKLPC20.22A Feeding particle size <1100mm,Discharging granularity <75mm ,Production capacity: 700t/h |
| Siltstone Crushing |
Jaw crusher |
PE-900X1200 Feeding particle size<750mm,Discharging granularity<150mm;Production capacity: 200t/h |
| Cone crusher |
PYS-1215 ;Feeding particle size <150mm;Discharging granularity<30mm ;Production capacity: 200t/h |
| Limestone pre-homogenization and storage yard |
Bridge-type scraping reclaimer |
Stack capacity: 1400t/h |
| Reclaimer capacity: 500t/h |
| Siltstone pre-homogenization and storage yard |
movable-type stacker |
Stack capacity: 200t/h |
| chain-plate-type reclaimer |
Reclaimer capacity: 110--130t/h |
| Raw coal pre-homogenization and storage yard |
Car-moving type stacker |
Stack capacity: 200t/h |
| Bridge-type scraping reclaimer |
Reclaimer capacity: 100t/h |
| Raw material grinding and waste gas treatment |
Vertical mill |
MLS4531;Production capacity360--400t/h;Moisture into the mill<6%;Moisture out of the mill<0.5%;Particle size into the mill<100mm;Discharging particle size :R80μm<12% |
| Raw mill fan |
Air volume:860000m3/h;Total pressure:9500Pa |
| Kiln tail high temperature fan |
Air volume:860000m3/h;Total pressure:7500Pa |
| High concentration electrostatic dust collector |
BS930type;Cross-section of the electric field:~310 m2;Disposing air volume:820000m3/h;Outlet dust concentration;Standard condition)≤50mg/m3 |
| Coal powder preparation |
Vertical mill |
MPF2116type;Production capacity:38~45t/h;Moisture into the mill<12%;Moisture out of the mill<1%;Particle size into the mill:<25mm;Discharging particle size:R80μm<12% |
| Burning system |
Rotary Kiln
|
- Φ4.8×74m;Inclination:4%;Bearing number;Rotate speed
:0.6~4.0r/min;Installed power:630kW;Production capacity: 5000t/d |
| Preheater and calciner |
Five pairs of preheater + decomposition furnace series
C1:4-Φ5.0m , C2:2-Φ6.9m,C3:2-Φ6.9m C4:2-Φ7.2m,C5:2-Φ7.2m;Decomposition furnace:Φ7.2x30.0m;Production capacity: 5000t/d |
| Grate cooler of control flow |
LBT36352;Grate bed area: 119.6 m2 ;Inlet material temperature
:1400ºC;Outlet material temperature:65ºC |
| Electric dust collector at kiln head |
Disposing air volume:550000m3/h;Cross-section of the electric field:196m2;Inlet dust concentration: ≤30 g/m3;Outlet dust concentration:≤50mg/Nm3 |
Audited Supplier 
){kind=link}
){kind=link}