| Application: | Construction |
|---|---|
| Certification: | CE, ISO |
| Customized: | Customized |
| Automatic Grade: | Semiautomatic |
| Transport Package: | Sea Worthy Packing |
| Specification: | 3*48m, 3.2*50m, 3.3*50m, 3.5*54m, 4*60m |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Structure and Working Principle
Main body of this dry process rotary kiln is rolled by steel plate, with refractory lining inside and shows a certain degree to the horizontal level. Each block support device is supported by three wheel belts. Fix a gear ring in the inner cylinder around feeding wheel belt with cutting spring plate, under it is a meshing pinion. When operating normally, transmit power to open gear device from main drive motor to main reducer to drive this cement clinker rotary kiln.
Material is calcinated in the kiln from its end. Because cylinder tilts and rotates slowly, material both rolls in the circumferential direction and moves in the axial direction (from high to low end). It continues to complete decomposition and calcination through physical and chemical changes. Finally, clinker comes to the cooler for cooling through the kiln head cover.
Fuel is injected into the kiln from kiln head. The exhaust gas will be discharged from the kiln after heat exchanging with material.
1. Cylinder and kiln lining
2. Wheel belt
3. Support device
4. Drive device
5. Kiln head cover
6. Burner
7. Smoke chamber
8. Heat exchange device
9. Feeding equipment
Cement Clinker Rotary Kiln Routine Inspection
1. Drive device
2. Wheel belt and support device
3. Kiln cylinder
4. Sealing device
| Specification (m) | Φ2.8/2.5× 44 | Φ3× 48 | Φ3.2 × 50 | Φ3.3 × 50 | Φ3.5×54 | Φ4× 60 | ||
| Capacity (ton/day) | 300 | 600-700 | 1000 | 1200 | 1500-1800 | 2500 | ||
| Slope of the kiln shell (%) | 3.5 | 3.5 | 3.5 | 4 | 4 | 4 | ||
| No. of supports | 3 | 3 | 3 | 3 | 3 | 3 | ||
| Type of thrust roller | Mechanical | Mechanical & hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic | ||
| Rotational Speed of Kiln | Main drive (rpm) | 0.445-2.22 | 0.676-3.38 | 0.36-3.57 | 0.36-3.57 | 0.39-3.9 | 0.41-4.07 | |
| Auxiliary drive (rpm) | 4.75 | 9.36 | 6.5 | 5.61 | 7.66 | 8.2 | ||
| Main drive | Reducer | Model | ZSN4-225-21 | Z2-101 | ZSN4-280-091B | ZSN4-280-091B | ZSN4-315-092 | ZSN4-355-092 |
| Rated power (kW) | 55 | 100 | 160 | 160 | 220 | 315 | ||
| Speed regulation range (rpm) | ~1000 | ~1500 | 1500 | 1500 | 1000 | 1000 | ||
| Rated voltage (V) | 440 | 220 | 440 | 440 | 440 | 440 | ||
| Reducer | Model | ZS145-1-1 | ZS145-1-1 | ZSY-450-40-V | ZSY450-40 | NZS995-28VIBL | YNS1110-22.4VBR | |
| Total ratio | 49-63 | 50 | 40 | 40 | 28 | 22.4 | ||
| Auxiliary drive | Electric Motor | Model | Y122M-4 | Y160M-6 | Y160M-4B | Y160M-4 | Y200L1-6 | Y180L-4 |
| Rated power (kW) | 4 | 7.5 | 15 | 11 | 18.5 | 22 | ||
| Speed regulation range (rpm) | 1440 | 970 | 1460 | 1460 | 970 | 1470 | ||
| Rated voltage (V) | 380 | 380 | 380 | 380 | 380 | 380 | ||
| Reducer | Model | ZL35-16 | ZL35-7-I | ZSY160-31.5-II | ZSY355-31.5 | ZSY355 | YNS440-45 II R | |
| Total ratio | 40.44 | 14 | 31.5 | 31.5 | 45 | 45 | ||
| Total weight (refractory brick excluded) (t) | 177 | 207 | 256.5 | 281 | 341 | 434 | ||
| Weight of discharging kiln hood (t) | 20 | 22 | 25 | 27 | 28 | 35 | ||
| Specification (m) | Φ4.3 × 64 | Φ4.8× 74 | Φ5.0 × 74 | Φ5.6 × 87 | Φ6.0 ×95 | ||
| Capacity (ton/day) | 3500 | 5000 | 6000 | 8000 | 10000 | ||
| Slope of the kiln shell (%) | 4 | 4 | 4 | 4 | 4 | ||
| No. of supports | 3 | 3 | 3 | 3 | 3 | ||
| Type of thrust roller | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic | ||
| Rotating Speed of Kiln | Main driving (rpm) | 0.4-4.0 | 0.35-4 | 0.35-4 | Max. 4.23 | Max. 5 | |
| Auxiliary driving (r/min) | 7.93 | 8.52 | 7.58 | 8.7 | 9.2 | ||
| Main drive | Reducer | Model | ZSN4-355-12 | ZSN4-400-092 | ZSN4-450-092 | ZSN4-450-12 | ZNS4-500-092 |
| Rated power (kW) | 400 | 630 | 710 | 800 | 950 × 2 | ||
| Speed regulation range (rpm) | 100~1000 | 1500 | 87.5~1000 | 100~1000 | 100~1000 | ||
| Rated voltage (V) | 440 | 660 | 660 | 660 | 660 | ||
| Reducer | Model | YNS1400-31.5VIBL | JH710C-SW305-40 | JH800C-28 | JH900C-SW305-25 | JS900C-SW305-28 | |
| Total ratio | 31.5 | 42.226 | 26.812 | 23.901 | 26.646 | ||
| Auxiliary drive | Electric Motor | Model | Y200L-4 | Y250M-4 | Y250M-4 | Y280M-4 | Y315M1-4 |
| Rated power (kW) | 30 | 55 | 55 | 90 | 132 | ||
| Speed regulation range (rpm) | 1470 | 1480 | 1480 | 1480 | 1490 | ||
| Rated voltage (V) | 380 | 380 | 380 | 380 | 380 | ||
| Reducer | Model | YNS497-45ZC | JH220C-SW302-28 | JS280C-45 | ZSY400-35.5-I | ZSY450-35.5-I | |
| Total ratio | 45 | 28 | 45 | 35.795 | 35.795 | ||
| Total weight (refractory brick excluded) (t) | 550.5 | 854 | 894 | 1201 | 1580 | ||
| Weight of discharging kiln hood (t) | 36 | 45 | 48 | ||||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}