50tph Slag Grinding Plant-Vertical Mill

• Customization: Available
• Application: Construction
• Certification: CE, ISO
• Model NO.: PFMS3200
• Customized: Customized
• Automatic Grade: Semiautomatic
• Transport Package: Export Standard Packing
• Specification: Chinese
• Trademark: Pengfei
• Origin: China
• Production Capacity: 50tph

Product Description

50tph slag grinding plant
Our vertical slag mill is typically designed to deal with industrial waste residues generated by the blast-furnace ironmaking. Due to its high physical and chemical activity, and potential hydraulicity, the slag has been widely as admixture matters in the cement industry. And the slag can replace the cement in the concrete to improve the quality and durability of the concrete.
Here in Jiangsu Pengfei Group Co., Ltd, our vertical slag mill has features of high grinding efficiency, strong dry capacity, easy adjustment, low noises, low electricity consumption, simple process flow, little abrasion, and so on.

Technical specification of PFMS3200 slag vertical mill for 50tph slag grinding plant

S/N	Parameter specification	Unit	Technical performance	Remark
0	Vertical roller mill		1
	Model		PFMS3200
	Grinding material		Slag
	Mill feeding size	mm	≤5	max:10mm
	Material moisture	%	≤15	Designed calculation basis
	Product fineness		≥4200cm2/g
	Product moisture	%	≤1.0
	Capacity	t/h	≥45	Confirmed based on raw material test result
	Required mill feeding normal/max hot gas volume	NM^3/h	See heat balance sheet
	Required mill feeding normal/max hot gas temperature	ºC	See heat balance sheet	270/300
	Required mill feeding max heat value	KJ/min	584000	For choosing heat gas furnace
	Mill air leakage factor	%	≤7
	Mill outlet normal/max air volume	NM^3/h	See heat balance sheet	145000/190000
	Mill outlet air temperature	ºC	85~95
	Grinding power consumption(mill+separator)	Kwh/t	32.5
	Total weight of vertical mill	t	~300
1	Separator
	1.1Separator rotor
	Speed range	r/min	50~175
	Material of impeller		Q235-A+UP plate
	Lifetime		More than two years
	Thickness of shell		16
	1.2 Separator drive device
	Speed adjustable model		Frequency conversion
	Motor model		YP355M2-6
	Power	kW	160
	Voltage	V	380
	Speed	r/min	960
	Level of production		IP54
	Reducer model		B2SV8
	Reducer manufacturer
	Reduction ratio		11.6
2	Grinding roller
	2.1 grinding roller
	Qty	nos	4
	Diameter	mm	1700
	Unit roller weight	t	14.0
	2.2 roller cover			Suzhou UP
	Material		ZG20SiMn+surface hard surfacing
	Lifetime for roller cover	h	More than 1800	Confirmed after raw material testing
	2.3  Grinding roller shaft		40Cr	Hardening
	2.4 Grinding roller bearing	set	4
	Double row tapered roller bearing	Model	531816
	Cylinder bearing	Model	NNU4180
	Lifetime	h	>50,000
	Allowed bearing max temperature rise	ºC	80
	2.5 Seal fan for grinding roller
	Model		9-28No4.5A-8
	Qty	Nos	1
	2.6 Grinding roller bearing lubrication
	Lubricating system		Circulating oil
3	Grinding table
	3.1table
	Material		ZG35
	Nominal diameter	mm	3200
	Speed	r/min	32.5
	Weight	t	~45.5
	3.2 liners for grinding table			Suzhou UP
	Material		ZG20SiMn+surface hard surfacing	HRC>58~62
	Lifetime for each set of liner	h	More than 1800	Confirmed after raw material testing
4	Upper shell
	4.1 shell		Q235-A	Thickness 16
	Weight	t	~12
	4.2side liners inside shell		Q235-A	CHP 6mm
	Lifetime	h	>18,000	Suzhou UP
	4.3 inspecting door
	Qty	nos	2
5	Rocker arm
	5.1upper and down rocker arm
	Qty		4
	Material of rocker arm		ZG35
	Material of rocker arm shaft		40Cr	Tempering
	5.2 bearing of rocker arm	nos	8
6	Mill stand
	Support		4
	Connecting bridge	nos	4
	Base-frame of mill stand	nos	1
	Base-frame of reducer	nos	1
7	Main drive
	7.1Main motor			Chongqing Motor
	Model		YRKK710-6
	Rated power	kW	1600
	Shaft out speed	r/min	990
	Level of production		IP54
	Insulation protection grade		F
	Rated voltage	kV	6 or 10
	Rated frequency	Hz	50
	Steps		6
	Power factor(cosj)		0.866
	Cooling type		IC611
	Weight of motor	t	~13.5
	7.2 Main reducer
	Model		MLX170	NGC
	Rated power	kW	1600
	Input shaft speed	r/min	993
	Output shaft speed	r/min	32.5
	Reduction ratio		30.5
	Temperature measuring poting of input shaft	nos	2
	Vibration detecting device(yes/no)		Yes
	Weight of reducer	t	~48
	7.3 Lubrication device of main reducer
	Model		XGD-C120/400
8	Hydraulic system of grinding roller
	8.1 Hydraulic cylinder of grinding roller	nos	4
	8.2Hydraulic station of grinidng roller	nos	1
	8.3 Oil cylinder for turning roller	nos	1
	Sealing parts
	Model		Movable
9	Mill water spray device
	Spray nozzle	nos	4
10	Pneumatic air lock valve	nos	1
11	Discharging air lock valve	nos	1	With tee joint part
	Model
	Qty	set	1
	Structure type		Pneumatic valve
	Plate of valve		Wear resisting plate