| Customization: | Available |
|---|---|
| Type: | Vertical Roller Mill |
| Motor Type: | AC Motor |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| No. | Name | Model and Specification | Unit | Qty | Note |
| 1 | Plate chain elevator | NE50(Process determining height) | nos | 1 | Returned material |
| 1P | Reducer | ZSY160-25 | |||
| 1M | Motor | Y160-4-11 11KW 380V/50Hz | nos | 1 | |
| 2 | Electrical iron separator | RCDB-8 exciting power 1.9KW | nos | 2 | Above belt type conveyor |
| suspended heights 150mm supporting power KGLA-20/300 | |||||
| 3 | bar valve | 600X600 | 1 | ||
| 4 | Electrical belt feeding weigher | TDG800 L=2000 | nos | 1 | |
| 5M | Belt conveyor | B650(Process determining length and angle) | nos | 2 | |
| 5PM | motorized pulleyTDY503 5.5KW | ||||
| 6 | Rotary air lock feeder | φ630*630 Q<100m3/h | nos | 1 | |
| Feeding size | <40mm | ||||
| 6M | Reduction motor | XWED5.5-95-1/187 5.5KW | |||
| 7 | Vertical mill | HRM2200 S | nos | 1 | |
| Capacity | 25~30T/h | ||||
| Feeding size | <10mm feeding moisture 10% | ||||
| Discharging moisture | <0.5% | ||||
| Discharging size | Blaine:400~420m2/kg | ||||
| 7P | Main reducer | MLX80 | nos | 1 | Nanjing High Accurate Drive |
| 7M | Main motor | YRKK560-6 800KW 10000V/50Hz | nos | 1 | |
| 7S | Separator | 50~180r/min | nos | 1 | |
| 7SM | Separator motor | YVP280S-10(frequency conversion ) 75KW |
nos | 1 | |
| 7SP | Separator reducer | B2SV-5 i=6.5 | |||
| 7R | Main reducer lubrication oil station | XRZ-250G | nos | 1 | south lubrication |
| 7RM | Lubrication oil station motor | Y132S-41440r/min 5.5KW | nos | 2 | |
| 7Y | High pressure oil station | nos | 1 | ||
| 7YM | High pressure oil station motor | Y132M-4 5.5KW 380V/50Hz | nos | 1 | |
| 7H | Electrical heater | SRY2-254/3 3KW 220V/50Hz | nos | 2 | |
| 7T | Low pressure lubrication oil station | XRZ-10-2X10 | nos | 1 | south lubrication |
| 7TM | Lubrication motor | Y802-4/B5 0.75KW | nos | 2 | |
| 8 | Air pulse filter | PPCS96-2X10 | nos | 1 | |
| air volume120000m3/h | |||||
| Inlet concentration | <1000g/Nm3 exit concentration <50mg/Nm3 |
||||
| Air temperature at inlet | 70~80ºC Air pressure0.5-0.7MPa 3m3/min | ||||
| 8L | Screw conveyor | LS400 | nos | 2 | |
| 8LPM | Motor reducer | BWY27-29-7.5 380V/50Hz | |||
| 8G | Cindervalve | 500X500 | nos | 2 | |
| 8GPM | Motor reducer | BLY22-59-2.2 3KW 380V/50Hz | |||
| 9 | Vertical mill blower | M6-31No18.5 D 1450r/min(with adjusting fan) | nos | 1 | |
| 9M | Motor | Y400-4 1450r/min 560KW 6000V | nos | 1 | |
| air volume129000m3/h total pressure8512pa | |||||
| 10 | Recirculating air butterfly valve | DN1200mm (with electric actuator) | nos | 1 | |
| 11 | cold air butterfly valve | DN800mm (with electric actuator) | nos | 1 | |
| 12 | hot air butterfly valve | DN1300mm (with electric actuator ) |
nos | 1 | |
| 13 | Circulating air hose wave compensator | DN1200 | nos | 1 | Scope -20ºC~120ºC |
| 14 | Vertical mill air outlet wave compensator | DN1600 | nos | 1 | Scope -20ºC~120ºC |
| 15 | Vertical mill air intake wave compensator | DN1500 | nos | 1 | Scope -20ºC~400ºC |
| 16 | Blast stove wave compensator | DN1300 | nos | 1 | Scope -20ºC~1000ºC |
| 17 | Dust collector air intake wave compensator | DN1000 | nos | 1 | Scope -20ºC~100ºC |
| 18 | Blast stove system | set | 1 | provided by the customer | |
| 19 | PLC monitoring system | set | 1 | User Options | |
| 20 | Field instrument | set | 1 | ||
| 21 | Fan start cabinet | nos | 1 | ||
| 22 | Vertical mill start cabinet | nos | 1 | ||
| 23 | Auxiliary engine control cabinet | nos | 1 | ||
| 24 | lubrication station control cabinet | set | 1 | with the main engine | |
| 25 | Pressure station control cabinet | nos | 1 | with the main engine | |
| Total | |||||
){kind=link}